manualshive.com logo in svg

BMW Z4 Roadster, Owner'S Handbook Manual, Page: 217 / 344

Share
Download
BMW Z4 Roadster Owner'S Handbook Manual Download Page 217

▷

Trailer drawbars and tow hitches of other ve‐
hicles.

▷

Thin or wedge-shaped objects.

▷

Moving objects.

▷

Higher protruding objects, for example pro‐
jecting walls.

▷

Objects with corners, edges and smooth sur‐
faces.

▷

Objects with fine surfaces or structures, for
example fences.

▷

Objects with porous surfaces.

▷

Small and low objects such as boxes.

▷

Obstacles and people at the edge of the lane.

▷

Soft obstacles or obstacles covered in foam.

▷

Plants or shrubs.

▷

Low objects already indicated, for example
kerbs, may enter the sensors' blind areas be‐
fore or after a continuous tone is given.

▷

The system does not take into account loads
projecting beyond the outline of the vehicle.

In some cases, parking spaces may be detected
that are not suitable or suitable parking spaces
may not be detected.

Malfunction

A Check Control message is shown.
The Park Assistant has failed. Have the system
checked by a Service Partner of the manufac‐
turer or another qualified Service Partner or a
specialist workshop.

Crossing traffic warning

Principle

At blind exits or when reversing out of perpendic‐
ular parking spaces, the system detects other
road users approaching from the side earlier than
is possible from the driver's seat.

General

Two radar sensors in the rear bumper monitor
the area behind the vehicle.
The system indicates when other road users are
approaching.

Safety note

WARNING

The system does not relieve you of your per‐
sonal responsibility to assess the visibility con‐
ditions and traffic situation correctly. There is a
danger of accidents. Adapt your driving style to
the traffic conditions. Observe the traffic situa‐
tion and intervene actively if the situation war‐
rants it.

Overview

Button in the vehicle

Park Assistant button

Seite 217

Driver Assistance Systems

CONTROLS

217

Online Edition for Part no. xxx - X/18

Summary of Contents for Z4 Roadster

























































































































































































































































































































































Reviews:

No comments