BMW Z4 Roadster Owner'S Handbook Manual Download Page 155

Page: 155 / 344

Overview

Switching on/off

Via iDrive:

"CAR"

"Settings"

"Displays"

"Head-up display"

Display

Overview

The following information is displayed in the
Head-Up Display:

▷

Speed.

▷

Navigation instructions.

▷

Check Control messages.

▷

Selection list in the instrument cluster.

▷

Driver Assistance Systems.

▷

Sport displays.

Some of this information is only shown briefly
when needed.

Selecting the view

Various views are available in the Head-Up Dis‐
play.
Via iDrive:

"CAR"

"Settings"

"Displays"

"Head-up display"

"Display mode"

Select the desired setting.

The setting is saved for the currently used driver
profile.

Editing Individual

Via iDrive:

"CAR"

"Settings"

"Displays"

"Head-up display"

"Configure Individual"

Select the desired setting.

The setting is saved for the currently used driver
profile.

Adjusting the brightness

The brightness is automatically adapted to the
ambient light.
The basic setting can be adjusted manually.
Via iDrive:

"CAR"

"Settings"

"Displays"

"Head-up display"

"Brightness"

Turn the Controller until the desired bright‐
ness is obtained.

Press the Controller.

The brightness of the Head-Up Display can also
be adjusted with the instrument lighting if the
low-beam headlights are switched on.

Seite 155

Displays

CONTROLS

155

Online Edition for Part no. xxx - X/18

Summary of Contents for Z4 Roadster

























































































































































































































































































































































Search results

Summary of Contents for Z4 Roadster

Reviews:

Related manuals for Z4 Roadster

Brands by name

Popular brands

BMW Z4 Roadster, Owner'S Handbook Manual

Search results

Summary of Contents for Z4 Roadster

Reviews:

Related manuals for Z4 Roadster

Brands by name

Popular brands