BMW Z4 Roadster, Owner'S Handbook Manual, Page: 229 / 344

To adjust the air distribution
manually
Principle
The air distribution for air conditioning can be set
manually.
Operation
Press the button repeatedly to select a
programme:
▷ Windows, upper body area and footwell.
▷ Upper body area and footwell.
▷ Footwell.
▷ Windows and footwell.
▷ Windows.
▷ Windows and upper body.
▷ Upper body area.
Selected air distribution is shown on the climate
display.
If there is condensation, remove it, see
page
229 .
SYNC programme
Principle
The following settings on the driver's side can be
transferred to the front passenger's side:
▷ Temperature.
▷ Air flow.
▷ Air distribution.
▷ AUTO programme.
Switching on/off
Via iDrive:
1. "CAR"
2. "Settings"
3. "Climate comfort"
4. "Synchronise"
The programme is switched off automatically if
settings are changed on the front passenger's
side or in the rear passenger compartment.
Defrosting the windscreen and
removing condensation
Principle
Ice and condensation are quickly removed from
the windscreen and the front side windows.
Switching on/off
Press the button.
The LED is illuminated when the sys‐
tem is switched on.
The air flow can be adjusted manually when the
system is switched on.
If there is condensation on the window,
press the button on the driver's side or
switch on the cooling function to use the advan‐
tages of the condensation sensor. Ensure that air
can flow towards the windscreen.
Rear window heating
Press the button. The LED is illumina‐
ted.
The function is available when the engine is run‐
ning.
The rear window heating is switched off auto‐
matically after a certain period of time.
Microfilter/activated carbon filter
The microfilter traps dust and pollen in the in‐
coming air.
The activated carbon filter also removes gaseous
pollutants from the outside air entering the vehi‐
cle.
Have this combined filter replaced during vehicle
maintenance, see page
301 .
Seite 229
Climate
CONTROLS
229
Online Edition for Part no. xxx - X/18