BMW Z4 Roadster Owner'S Handbook Manual Download Page 53

Page: 53 / 344

Via iDrive:

Select the required page in the main menu. It
is only possible to adapt the page that is cur‐
rently selected.

Tilt the Controller up.

"Adjust main menu"

Select the desired adaptation:

▷

Add a new widget: "Add widget".
It is possible to display a maximum of four
widgets per page.

▷

Add a new page: "Add page".

▷

Delete the selected page: "Delete page".

▷

Adapt the widget content: select the
widget.

"Done"

Adapt the menu content

The display of the "MEDIA", "COM" and "NAV"
menus can be adapted, for example to remove
the entries for unused functions from the menu.

Select menu.

"Personalise menu"

Select the menu content that is intended to
be displayed.

Switching between screens

After a menu item has been selected, for exam‐
ple "Settings", a new screen is displayed.

▷

Tilt the Controller to the left.
The current screen is closed and the previ‐
ous screen is displayed.

▷

Press the button.

The previous screen is opened again.

▷

Tilt the Controller to the right.
The new screen is opened.

An arrow indicates that further screens can be
called up.

Calling up the Options menu

Press the button.

The "Options" menu is displayed.
The menu consists of various areas:

▷

Help for selected menu; for example "Help".

▷

System settings; for example "Control display
off".

▷

Operating options for the main menu selec‐
ted, for example for "Media/Radio".

Adjusting the settings

Settings such as brightness can be adjusted.
Via iDrive:

"CAR"

"Settings"

"Displays"

"Control display"

"Brightness at night"

Turn the Controller until the desired setting is
displayed.

Press the Controller.

Entering letters and numbers

Entry

Turn the Controller: to select letters or num‐
bers.

: to confirm your entry.

Deleting

Symbol Function

Press Controller: to delete letters or
numbers.

Press and hold the Controller: to de‐
lete all letters or numbers.

Seite 53

iDrive

CONTROLS

Online Edition for Part no. xxx - X/18

Summary of Contents for Z4 Roadster

























































































































































































































































































































































Search results

Summary of Contents for Z4 Roadster

Reviews:

Related manuals for Z4 Roadster

Brands by name

Popular brands

BMW Z4 Roadster, Owner'S Handbook Manual

Search results

Summary of Contents for Z4 Roadster

Reviews:

Related manuals for Z4 Roadster

Brands by name

Popular brands