BMW Z4 Roadster Owner'S Handbook Manual Download Page 152

Page: 152 / 344

▷

If the camera has overheated due to exces‐
sively high temperatures and has been tem‐
porarily deactivated.

▷

As a result of incorrect detection by the cam‐
era.

▷

If the speed limits stored in the navigation
system or road data are incorrect.

▷

In the case of speed limits that depend or the
time of day or day of the week.

▷

In areas not covered by the navigation sys‐
tem.

▷

If there are deviations in relation to navigation,
for example due to changes in road routing.

▷

In the case of electronic road signs.

▷

When overtaking buses or trucks with road
sign stickers.

▷

If traffic signs do not correspond to the stand‐
ard.

▷

If signs are detected that apply to a parallel
road.

▷

In the case of country-specific signs or road
layouts.

▷

During the camera calibration process imme‐
diately after vehicle delivery.

Selection lists

Principle

The instrument cluster or the Head-Up Display
can show lists for certain functions and can be
used for operation where applicable.

▷

Entertainment source.

▷

Current audio source.

▷

Last calls list.

If applicable, the relevant menu is opened on the
Control Display.

Display

Depending on the equipment, the list in the in‐
strument cluster may differ from the illustration.

Displaying and using the list

Button

Function

To change the entertainment
source.
Press the button again to close
the list currently displayed.

Display the last calls list.

Turn the knurled wheel to se‐
lect the desired setting.
Press the knurled wheel to con‐
firm the setting.
The list that is currently selec‐
ted can be displayed in the in‐
strument cluster again by turn‐
ing the knurled wheel.

Journey data

Principle

Values relating to the journey, for example the
average consumption, are displayed.

General

The journey data can be shown on the Control
Display and in the instrument cluster.

Seite 152

CONTROLS

Displays

152

Online Edition for Part no. xxx - X/18

Summary of Contents for Z4 Roadster

























































































































































































































































































































































Search results

Summary of Contents for Z4 Roadster

Reviews:

Related manuals for Z4 Roadster

Brands by name

Popular brands

BMW Z4 Roadster, Owner'S Handbook Manual

Search results

Summary of Contents for Z4 Roadster

Reviews:

Related manuals for Z4 Roadster

Brands by name

Popular brands