BMW F 750 GS Page 41 Rider'S Manual Download

Page: 41 / 348

Electronic immobiliser active

lights up yellow.

is displayed.

Possible cause:

The key being used is not au-

thorised for starting, or com-

munication between key and

engine electronics is disrupted.

Remove all other vehicle keys

from the same ring as the

vehicle key being used.

Use spare key.

Have the defective key re-

placed, preferably by an au-

thorised BMW Motorrad re-

tailer.

Radio-operated key out of

range

with Keyless Ride

lights up yellow.

appears on the display.

Possible cause:

Communication between R/C

key and engine electronics is

disrupted.

Check the battery in the ra-

dio-operated key.

with Keyless Ride

Replace the battery of the ra-

dio-operated key (

82).

Use the reserve key to con-

tinue your journey.

with Keyless Ride

Battery of the radio-operated

key is empty or loss of the

radio-operated key (

81).

Remain calm if the warning

symbol appears while you are

riding. You can continue your

journey; the engine will not

switch off.

Have the defective radio-op-

erated key replaced by an au-

thorised BMW Motorrad Re-

tailer.

Replace the battery of radio-

operated key

with Keyless Ride

lights up yellow.

KEYLO!

appears on the

display.

Possible cause:

The integral battery in the ra-

dio-operated key has lost a

significant proportion of its

original capacity. There is no

assurance of how long the ra-

dio-operated key can remain

operational.

Replace the battery of the ra-

dio-operated key (

82).

Summary of Contents for F 750 GS





























































































































































































































































































































































Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands

BMW F 750 GS, Rider'S Manual

Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands