BMW F 750 GS Page 132 Rider'S Manual Download

Page: 132 / 348

126

TFT DISPLAY

Range

The range readout

indicates

how far you can ride with the

fuel remaining in the tank. This

distance is calculated on the

basis of average consump-

tion and the quantity of fuel

on board.

When the motorcycle is

propped on its side stand

the slight angle of inclination

means that the sensor

cannot register the fuel level

correctly. This is the reason

why the range is recalculated

only when the side stand is in

the retracted position.

The range is shown together

with a warning once the fuel

reserve has been reached.

After a refuelling stop, range

is recalculated if the amount

of fuel in the tank is greater

than the reserve quantity.

The calculated range is only

an approximate figure.

Recommendation to upshift

The recommendation to upshift

in the Pure Ride view

or in

the status line

indicates the

best time to upshift economic-

ally.

GENERAL SETTINGS

Adjusting volume

Connect rider's and passen-

ger's helmet (

130).

Increase volume: turn the

multi-controller upwards.

Decrease volume: turn the

multi-controller downwards.

Mute: turn the multi-controller

all the way down.

Setting the date

Switch on the ignition (

78).

Navigate to

Settings

Sys-

tem settings

Date and

time

Set date

Set

Day

Month

and

Year

Confirm setting.

Summary of Contents for F 750 GS





























































































































































































































































































































































Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands

BMW F 750 GS, Rider'S Manual

Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands