BMW F 750 GS Page 199 Rider'S Manual Download

Page: 199 / 348

193

using a suitable auxiliary

stand.

with centre stand

Make sure the ground is level

and firm and with the engine

at operating temperature,

place the motorcycle on its

centre stand.

Wait five minutes for the oil

to drain into the oil pan.

Remove oil dipstick

Clean measuring area

with

a dry cloth

Seat the oil dipstick on the oil

filler neck, but do not engage

the threads.

Remove the oil dipstick and

check the oil level.

Engine oil, specified

level

Between

MIN

and

MAX

marks

Engine oil, quantity for

topping up

max 0.5 l (Difference

between MIN and MAX)

If the oil level is below the MIN

mark:

Topping up the engine oil

(

194).

If the oil level is above the MAX

mark:

Have the oil level corrected

by a specialist workshop,

preferably an authorised

BMW Motorrad retailer.
Install the oil dipstick.

Summary of Contents for F 750 GS





























































































































































































































































































































































Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands

BMW F 750 GS, Rider'S Manual

Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands