BMW F 750 GS Page 134 Rider'S Manual Download

Page: 134 / 348

128

TFT DISPLAY

threshold, the display is

dimmed to the brightness set

here.

Resetting all settings

All the settings in the

Set-

tings

menu can be reset to

the factory settings.

Call up the

Settings

menu.

Select

Reset all

and con-

firm.

The settings in the following

menus are reset:

Vehicle settings
System settings
Connections
Display
Information

Existing Bluetooth connec-

tions are not deleted.

BLUETOOTH

Short-range wireless

technology

The Bluetooth function might

not be available in certain

countries.
Bluetooth is a short-range

wireless technology. Bluetooth

devices are short-range devices

transmitting on the license-free

ISM band (Industrial, Scientific,

Medical) between 2.402 GHz

and 2.480 GHz. They can

be operated anywhere in the

world without a licence being

required.

Although Bluetooth is designed

to establish and sustain ro-

bust connections over short

distances, as with every other

wireless technology disruptions

are possible. Interference can

affect connections or connec-

tions can sometimes fail. Par-

ticularly when multiple devices

operate in a Bluetooth network,

with wireless technology of this

nature it is not possible to en-

sure fault-free communications

in every situation.

Possible sources of

interference:

interference zones due to

transmission masts and sim-

ilar.

devices with non-compliant

Bluetooth implementations.

proximity of other Bluetooth-

compatible devices.

Pairing

Two Bluetooth devices have

to recognise each other be-

fore they can communicate.

This process of mutual recogni-

tion is known as pairing. When

two devices have paired they

remember each other, so the

pairing process is conducted

only once, on initial contact.

Summary of Contents for F 750 GS





























































































































































































































































































































































Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands

BMW F 750 GS, Rider'S Manual

Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands