BMW F 750 GS Page 51 Rider'S Manual Download

Page: 51 / 348

WARNING

Irregular engine operation or

engine shutdown due to lack

of fuel

Risk of accident, damage to

catalytic converter

Do not run the fuel tank dry.

Possible cause:

The fuel tank contains no more

than the reserve quantity of

fuel.

Reserve fuel

approx. 3.5 l

Refuelling (

165).

Fuel reserve

The fuel quantity remaining in

the fuel tank once the fuel re-

serve indicator light switches

on depends on the riding dy-

namics. The more the fuel

moves around in the fluid tank

(caused by frequent changes

in lean angle, frequent braking

and accelerating), the harder it

is to determine the fuel reserve.

For this reason, it is not pos-

sible to accurately state the fuel

reserve volume.

The range is displayed

automatically once the

fuel warning light is switched

on.

The distance that can still be

travelled using the reserve

quantity depends on the style

of riding (consumption) and the

amount of fuel remaining at

the time the light came on (see

explanation above).

After a refuelling stop, the dis-

tance counter for reserve fuel

is reset if the amount of fuel in

the tank is greater than the re-

serve quantity.

Service-due indicator

When the next service is

due within a month, the

wording

SERVT!

and

the service due date

are

displayed. This information

appears briefly after the Pre-

Ride-Check completes.

Summary of Contents for F 750 GS





























































































































































































































































































































































Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands

BMW F 750 GS, Rider'S Manual

Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands