BMW F 750 GS Page 102 Rider'S Manual Download

Page: 102 / 348

OPERATION

DATE AND TIME

Setting the clock

Requirement

The vehicle is at a standstill.

Switch on the ignition.

Select SETUP (

94).

SETUP CLOCK

is displayed.

Press and hold the bottom

part of the MENU rocker but-

ton to set the hours.

The hours

flash.

Press the top part of the

MENU rocker button briefly to

advance the hours.

Press the bottom part of the

MENU rocker button briefly to

go back an hour.

Press and hold the bottom

part of the MENU rocker but-

ton once the desired hour has

been set.

The minutes

flash.

Press the top part of the

MENU rocker button briefly to

advance the minutes.

Press the bottom part of the

MENU rocker button briefly to

go back a minute.

Press and hold the bottom

part of the MENU rocker but-

ton once the desired minute

has been set.

The minutes

stop flashing.

Checking the setting on the

time display

This completes the process.

Press and hold the top part of

the MENU rocker button.

SETUP ENTER

is displayed.

Setting the date

Requirement

The vehicle is at a standstill.

Switch on the ignition.

Select SETUP (

94).

SETUP DATE

is displayed.

Press and hold the bottom

part of the MENU rocker but-

ton.

Day

flashes.

Summary of Contents for F 750 GS





























































































































































































































































































































































Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands

BMW F 750 GS, Rider'S Manual

Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands