BMW F 750 GS Rider'S Manual Download Page 77

Page: 77 / 348

DTC self-diagnosis not

completed

slow-flashes.

Possible cause:

DTC self-diagnosis not

completed

The DTC function is not

available, because self-

diagnosis did not complete.

(The motorcycle has to reach

a defined minimum speed

with the engine running for

the wheel-speed sensors to

be checked: min 5 km/h)

Pull away slowly. Bear in

mind that the DTC function

is not available until self-

diagnosis has completed.

DTC switched off

lights up.

Off!

Traction control de-
activated.

Possible cause:

The rider has switched off the

DTC system.

Switch on DTC (

100).

DTC restricted

lights up.

Traction control
limited! Onward

journey possible.
Ride carefully to next
specialist workshop.

Possible cause:

The DTC control unit has de-

tected a fault.

ATTENTION

Damaged components

Damage to sensors, for ex-

ample, which causes malfunc-

tions

Do not transport any ob-

jects underneath the driver

or passenger seat.

Secure the toolkit.

Do not damage the angular

rate sensor.

Bear in mind that the DTC

function is restricted.

You can continue to ride.

Bear in mind the more

detailed information on

situations that can lead to a

DTC fault (

178).

Have the fault rectified as

quickly as possible by a spe-

cialist workshop, preferably an

authorised BMW Motorrad re-

tailer.

Summary of Contents for F 750 GS





























































































































































































































































































































































Search results

Summary of Contents for F 750 GS

Reviews:

BMW F 750 GS, Rider'S Manual, Page: 77 / 348

Search results

Summary of Contents for F 750 GS

Reviews: