BMW F 750 GS Page 78 Rider'S Manual Download

Page: 78 / 348

STATUS INDICATORS

DTC fault

lights up.

Traction control
failure! Onward

journey possible.
Ride carefully to next
specialist workshop.

Possible cause:

The DTC control unit has de-

tected a fault.

Bear in mind that the DTC

function is not available or

the functionality is subject to

certain restrictions.

You can continue to ride.

Bear in mind the more

detailed information on

situations that can lead to a

DTC fault (

178).

Have the fault rectified as

quickly as possible by a spe-

cialist workshop, preferably an

authorised BMW Motorrad re-

tailer.

DESA fault

lights up yellow.

Spring strut adjust-
ment faulty! Onward

journey possible. Ride
carefully to next spe-
cialist workshop.

Possible cause:

The DESA control unit has de-

tected a fault. The damping

and/or spring adjuster may be

the cause. In this condition, the

motorcycle may have too much

damping and is uncomfortable

to drive, especially on roads in

poor condition. Alternatively,

the spring preload may be in-

correctly adjusted.

Have the fault rectified as

quickly as possible by a spe-

cialist workshop, preferably an

authorised BMW Motorrad re-

tailer.

Fuel down to reserve

Fuel reserve reached. Go

to a filling station soon.

WARNING

Irregular engine operation or

engine shutdown due to lack

of fuel

Risk of accident, damage to

catalytic converter

Do not run the fuel tank dry.

Possible cause:

The fuel tank contains no more

than the reserve quantity of

fuel.

Reserve fuel

approx. 3.5 l

Summary of Contents for F 750 GS





























































































































































































































































































































































Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands

BMW F 750 GS, Rider'S Manual

Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands