BMW F 750 GS Page 173 Rider'S Manual Download

Page: 173 / 348

167

ATTENTION

Wetting of plastic surfaces

by fuel

Damage to the surfaces (sur-

faces become unsightly or

dull)

Clean plastic surfaces im-

mediately after contact with

fuel.

Make sure the ground is level

and firm and place the motor-

cycle on its side stand.

with Keyless Ride

Switching off ignition (

81).

The fuel filler cap can be

opened within the defined

waiting time after the ignition

has been switched off, without

the radio-operated key being

within range.

Waiting time for open-

ing the fuel filler cap

2 min

There are

two variant ways

of opening the fuel filler cap:

Within the waiting time.

After the waiting time has ex-

pired.

with centre stand

WARNING

Fuel is highly flammable

Risk of fire and explosion

Do not smoke. Never bring

a naked flame near the fuel

tank.

WARNING

Escape of fuel due to heat-

induced expansion if fuel

tank is overfilled

Risk of falling

Do not overfill the fuel tank.

ATTENTION

Wetting of plastic surfaces

by fuel

Damage to the surfaces (sur-

faces become unsightly or

dull)

Clean plastic surfaces im-

mediately after contact with

fuel.

Make sure the ground is level

and firm and place the motor-

cycle on its centre stand.

with Keyless Ride

Switching off ignition (

81).

The fuel filler cap can be

opened within the defined

waiting time after the ignition

Summary of Contents for F 750 GS





























































































































































































































































































































































Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands

BMW F 750 GS, Rider'S Manual

Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands