BMW F 750 GS Rider'S Manual Download

Page: 87 / 348

ABS self-diagnosis is in pro-

gress. (

156)

DTC self-diagnosis is in pro-

gress. (

157)

Switching off ignition

Requirement

Radio-operated key is within

range.

There are

two

ways of deac-

tivating the ignition.

Version 1:

Briefly press button

Light is switched off.

Handlebars (steering lock) are

not locked.

Version 2:

Turn the handlebars all the

way to left.

Press and hold down but-

ton

Light is switched off.

The steering lock engages.

Battery of the radio-operated

key is empty or loss of the

radio-operated key

If a key is lost or mislaid, con-

sult the notes on the elec-

tronic immobiliser (

EWS

If you happen to lose or

mislay the radio-operated

key while on a journey, you

can start the vehicle with the

spare key.

If the battery of the radio-

operated key is empty, the

vehicle can be started by

simply inserting the folded

radio-operated key into the

ring aerial under the seat.

Removing seat (

115).

Insert the spare key or folded-

in radio-operated key with

the empty battery

into ring

aerial

The spare key or the

closed radio-operated key

with the empty battery

must

be inserted into

the opening in

the ring aerial.

Summary of Contents for F 750 GS





























































































































































































































































































































































Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands

BMW F 750 GS, Rider'S Manual

Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands