BMW F 750 GS Rider'S Manual Download Page 141

Page: 141 / 348

135

WARNING

Distraction from the road

and loss of control

Operating the integrated in-

formation system and com-

munication devices while

driving results in a risk of ac-

cident

Operate those systems or

devices only when the traffic

situation allows for it.

If necessary, stop and oper-

ate the systems or devices

when stationary.

Precondition

The vehicle is connected to a

compatible mobile device.
The BMW Motorrad Connec-

ted app is installed on the con-

nected mobile device.

On some mobile devices,

e.g. those with iOS

operating systems, the

BMW Motorrad Connected App

must be opened before use.

Entering destination address

Connect mobile device

(

129).

Call up the BMW Motorrad

Connected app and start the

route guidance.

Call up the

Navigation

menu in the TFT display.

Active route guidance is dis-

played.

If active route guidance is

not displayed, consult the

troubleshooting chart in the

section entitled "Technical

data". (

251)

Selecting destination from

recent destinations

Call up the

Navigation

Recent destinations

menu.

Select and confirm destina-

tion.

Select

Start route guid-

ance

Selecting destination from

favourites

The

FAVOURITES

menu dis-

plays all destinations which

have been saved as favourites

in the BMW Motorrad Con-

nected app. You cannot use

the TFT display to add favour-

ites to the list.

Call up the

Navigation

Favourites

menu.

Select and confirm destina-

tion.

Select

Start guidance

Summary of Contents for F 750 GS





























































































































































































































































































































































Search results

Summary of Contents for F 750 GS

Reviews:

BMW F 750 GS, Rider'S Manual, Page: 141 / 348

Search results

Summary of Contents for F 750 GS

Reviews: