BMW F 750 GS Rider'S Manual Download Page 103

Page: 103 / 348

Press the top part of the

MENU rocker button briefly to

advance the day.

Press the bottom part of the

MENU rocker button briefly to

go back one day.

Press the bottom part of the

MENU rocker button and hold

once the desired day has

been set.

Month

flashes.

Press the top part of the

MENU rocker button briefly to

advance the month.

Press the bottom part of the

MENU rocker button briefly to

go back one month.

Press the bottom part of the

MENU rocker button and hold

once the desired month has

been set.

Year

flashes.

Press the top part of the

MENU rocker button briefly to

advance the year.

Press the bottom part of the

MENU rocker button briefly to

go back one year.

Press the bottom part of the

MENU rocker button and hold

once the desired year has

been set.

Year

no longer flashes.

This completes the process.

Press and hold the top part of

the MENU rocker button.

SETUP ENTER

is displayed.

GENERAL SETTINGS IN THE

MULTIFUNCTION DISPLAY

Adjusting the brightness

of the backlighting in the

instrument cluster

Requirement

The vehicle is at a standstill.

Switch on the ignition.

Select SETUP (

94).

Repeatedly short-press

the MENU rocker but-

ton at the top

until

SETUP BRIGHT

is displayed.

Briefly press the bottom

part

of the MENU rocker

button repeatedly until the

desired brightness of the

backlighting is set.

Press and hold the top part

of the MENU rocker button to

quit

SETUP

SETUP ENTER

is displayed.

Summary of Contents for F 750 GS





























































































































































































































































































































































Search results

Summary of Contents for F 750 GS

Reviews:

BMW F 750 GS, Rider'S Manual, Page: 103 / 348

Search results

Summary of Contents for F 750 GS

Reviews: