BMW F 750 GS Page 243 Rider'S Manual Download

Page: 243 / 348

237

Turn ignition key

clockwise.

The navigation device is se-

cured and the ignition key can

be removed.

Removing navigation device

and installing cover

ATTENTION

Dust and dirt on the

Mount Cradle contacts

Damaged contacts

Always reinstall the cover as

soon as you finish your ride.

Turn ignition key

anti-clock-

wise.

Pull the lock retainer

all the

way to the

left

Lock

is unlocked.

Push lock

all the way to the

left

The navigation device

unlocked.

Tilt the navigation device

downwards and remove.

Insert cover

in the lower

section and swing to the top

with a rotational movement.

The cover engages with an

audible click.

Push lock retainer

to the

right

Turn ignition key

clockwise.

Cover

is secured and the

ignition key can be removed.

Operating navigation system

The description be-

low is based on the

BMW Motorrad Navigator V

and the BMW Motorrad Nav-

igator VI. The BMW Motorrad

Navigator IV does not support

all the options described here.

Only the latest version of

the BMW Motorrad com-

munication system is suppor-

ted. A software update of the

BMW Motorrad communic-

ation system may be neces-

sary. If this is the case, consult

Summary of Contents for F 750 GS





























































































































































































































































































































































Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands

BMW F 750 GS, Rider'S Manual

Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands