Blue Coat SG510 Series, Installation Manual

Page: 71 / 110

P/N 231-02833 Blue Coat SG510 Installation Guide page 71
Chapter 3: Removing and Installing Disk Drives
This chapter describes how to remove and install disk drives.
Important: The SG510 only supports disk-drive upgrade packages obtained
from Blue Coat Systems, Inc.
Important: You cannot hot-swap disks in the SG510; you will lose all
configuration settings.
A SG510 Appliance has open slots for two disk drives. The unit ships with two
blank disk-drive spacers already installed. Do not attempt to remove these blank
drives.
If your original appliance came with a single disk drive, upgrade options are
available from Blue Coat.
If you are upgrading your SG510 by adding (not replacing) disk drives, you can
skip to
“Installing a New Disk Drive” on page 73.
For initial installation of disk drives into a new SG510, see “Installing the Disk
Drives” on page 12.