Blue Coat SG510 Series, Installation Manual

Page: 45 / 110

P/N 231-02833 Blue Coat SG510 Installation Guide page 45
8
On page 4, press <Enter> or type
No
if you do not want to enter a forwarding
host at this time, or type
Yes
to enter a forwarding host.
If you type
Yes
, you must also provide a host alias and a host name or IP
address.
Figure 2-12: Initial Setup—Page Four
Note: You do not need to configure a forwarding host now unless
you are configuring multiple systems to point to the same
forwarding host.
--------------------- (page 4 of 5) --------------------
Press <ESC> at any time to return to the main menu
DIRECTIONS:
This setup console is used to configure a proxy
forwarding host as the forwarding default (a one member
default fail-over sequence). After assigning a host
alias and the host name you can connect to the command
line interface to perform additional management tasks.
Would you like to setup the forwarding host now? Y/N [No]