Blue Coat SG510 Series, Installation Manual

Page: 14 / 110

P/N 231-02833 Blue Coat SG510 Installation Guide page 14
If other equipment blocks the front panel from opening all the way, you can
pull the front panel forward, sliding out the front-panel tray until you can
access the disk drives.
Figure 1-7: Access the Disk Drive Slots
2
Position the disk-drive carrier upright, so that the disk-drive button appears
on the right; press this button to release the disk-drive lever.
Figure 1-8: Release the Disk-Drive Lever
3
Use the lever to slide the disk-drive carrier into the first open slot (Slot 1,
second from left).
Important: Always insert disk drives from left to right. If you have
only one disk drive, install it into drive Slot 1.
Pull out the front-panel tray, if necessary, to access the disk drives
Press the
disk-drive
button
The disk-drive lever
is released