Blue Coat SG510 Series, Installation Manual

Page: 20 / 110

P/N 231-02833 Blue Coat SG510 Installation Guide page 20
After you complete the first-time configuration, you must log on to the system
and use the command-line interface (CLI) or the Management Console graphical
user interface to fully configure the system. First-time configuration is designed
only to make sure that the SG510 hardware and software are working properly.
See
“Logging on to the SG510” on page 62 for more information.
Refer to the Blue Coat ProxySG Configuration and Management Guide Suite for
information on how to fully configure the software. Download the Blue Coat
ProxySG Configuration and Management Guide Suite , available on the Blue Coat
Web site at www.bluecoat.com . (Look for WebPower Login under Support .)
Remote
Configuration You can use this method if your appliance is running SGOS 4.2.2.x or
later. The remote configuration method is not supported for
appliances running 5.1.1.x or later.
Use two people to remotely configure the appliance—one who
enters the configuration parameters from a remote location and
another who places the SG510 into the network and finalizes the
configuration by clicking a generated URL.
To use the remote configuration method, go to
“Configuring the
SG510 from a Remote Location”
on page 55.
Configuration
Method
Description