Blue Coat SG510 Series, Installation Manual

Page: 77 / 110

P/N 231-02833 Blue Coat SG510 Installation Guide page 77
Chapter 5: Troubleshooting
This chapter describes how to isolate and solve common problems during the
installation of the SG510.
The SG510 does not power up
If the SG510 does not power up, check the following:
• The power cord is fully inserted into the back of the SG510.
• The power cord is plugged into a working outlet or power supply.
When the SG510 is powered up and running, the Power LED on the front panel of
the SG510 is on, the Disk Drive LEDs (for as many disks as are installed) are on,
and the LCD displays Blue Coat when starting up and then the LCD cycles
between CPU utilization and proxied traffic statistics when the SG510 is running.
Figure 5-1: SG510 Powering Up
LCD
Power LED