Blue Coat SG510 Series, Installation Manual

Page: 42 / 110

P/N 231-02833 Blue Coat SG510 Installation Guide page 42
Usernames and passwords can each be from 1 to 64 characters in length, and
that passwords that contain special characters (such as an exclamation point)
must be in quotes.
Figure 2-9: Initial Setup—Page Two
Note: For maximum security, you should restrict physical access to the
SG510. After initial configuration, you can change the workstation
restriction settings through the security commands in the CLI or the
Console Access tab in the Management Console. You can add or
remove IP addresses or you can enable or disable workstation
restrictions. For details, refer to
Volume 5: Securing the ProxySG in
the Blue Coat ProxySG Configuration and Management Guide Suite .
--------------------- (page 2 of 5) --------------------
Press <ESC> at any time to return to the main menu
DIRECTIONS:
The console username, password and enable password are
special administrative credentials which can be used to
log in to the command line interface or web management
interface.
WARNING - The console password and enable password are
not defined.
The system cannot start up until these are defined.
You must configure the console user account now.
Enter console username: name123
Enter console password: ”******”
Verify console password: ”******”
Enter enable password: ”******”
Verify enable password: ”******”