Blaze King TORINO, Users Installation Operation & Maintenance Manual

Page: 15 / 48

The torino
Page 15
INSTALLATION INSTRUCTIONS
Cont...
VENTING - Rear Vent
This appliance will not function without being connected to a proper venting system.
This unit can be used with Selkirk (Direct-Temp), American Metal, Security Chimneys
or Simpson Duravent 4" x 6-5/8" venting, but for the snorkel only the American Metal
can be used. Read the manufacturer’s installation instructions before installing the
venting system.
WARNING: never mix parts from different systems.
Typical Installation (for rear vented appliance)
- 36”(max) horizontal vent pipe exiting wall behind the appliance and 36" snorkel
(American Metal #
4D36S
only)
- One 45
o
elbow is allowed for corner installations (24” total length max).
VENTING - Top Vent
This appliance will not function without being connected to a proper venting system.
This unit can be used with Selkirk (Direct-Temp), American Metal, Security Chimneys
or Simpson Duravent 4" x 6-5/8" venting. Read the manufacturer’s installation
instructions before installing the venting system.
Typical Installation
- 24”(min) vertical vent pipe on top of the appliance,
- One 90
o
elbow, and up to 24” (max) horizontal run to the outside (with a 2' vertical
rise).
Other installations
- Up to 4 - 90
o
elbows, or equivalent, maximum.
- Minimum 2’ (610mm) straight length between bends.
- The total vertical height up to 30’ (9.14 m) maximum
- Use vent restrictor over 20’ vertical height
- The total horizontal run up to 16’ (4.88m) maximum.
- Note: 2’ (0.6m) minimum of vertical height required.
Note: Maximum vent lengths may be subject to local codes.