Blaze King TORINO, Users Installation Operation & Maintenance Manual

Page: 38 / 48

The torino
Page 38
Fig. 10a Burner Tray
Burner Tray (bottom view)
Mixing tube ple-
nums
To remove the burner tray from the firebox, follow these steps:
1. Disconnect the gas and electricity to the appliance
2. Open door
3. Take out logs and brick panels
4. Unscrew the two screws holding the burner in place (see fig 10b)
5. Lift out burner at front and take out of firebox
Install burner tray
When placing the burner tray back into the firebox, make sure the mixing tube plenums (see fig 10a)
slide over the orifices .Screw burner tray into firebox with two screws (see fig 10b), backup quarter turn
on one of the screws (for expansion in material).
When properly installed you should NOT be able to lift up the Burner tray at the back, the burner should
just move slightly (the distance between orifice and inside plenum tube) .
BURNER TRAY REMOVAL AND INSTALLATION
Screw 1
Screw 2
Figure 10b