Blaze King TORINO, Users Installation Operation & Maintenance Manual

Page: 8 / 48

The torino
Page 8
ASSEMBLY INSTRUCTIONS
GLASS DOOR REMOVAL
Removing the Glass Door
- Open the right side panel.
- Unhook the door latch.
- Swing the door open.
- Using a screw driver, remove the top glass retainer, making sure to hold the glass from falling out.
- Lift out and remove door glass with the gasket attached.
- If the glass door is damaged, it
must be replaced with another glass door certified with this
appliance only .
- Replacement glass doors are available through your Blaze King dealer (See Replacement Parts
page 46)
Replacing the Glass Door
- Check the condition of the glass and the gasket before installing door.
- Replace the window glass and gasket and re-install the top glass retainer.
- Swing the door shut and re-attached the door latch.
If the glass has been damaged contact your dealer and replace the glass and gasket with a new
glass and gasket provided by your dealer.
WARNING:
-
Do not attempt to remove the glass door when the appliance is hot.
- Do not abuse the glass door.
- Do not strike or slam the glass.
- Do not operate this appliance with cracked or broken glass.
- Do not use any substitute materials.