Blaze King TORINO, Users Installation Operation & Maintenance Manual

Page: 39 / 48

The torino
Page 39
VALVE REMOVAL AND INSTALLATION
The easiest way to remove the valve is:
1. Disconnect the gas and electricity to the appliance.
2. Remove pedestal front cover and rear cover (4 screws) including fan (fig. 10c).
3. Undo the gas lines (one in, two out and pilot).
4. Disconnect all electrical connections to valve including ground wire
5. Valve is attached to valve bracket with 4 screws, 2 at the back (see fig. 10d) and
two at the side, loosen all of them.
6. Installation is the reverse order of the previous steps.
Note: When installing new valve, check if any unused ports are plugged
Check outlet pressure (3.5” w.c.) and check for leaks
See page 23 for detailed gas valve image.
Undo 2 Screws
Figure 10d
Figure 10c