11
960H H.264 DVR User Manual
SECTION 2: HARDWARE OVERVIEW AND SETUP
6 .
Plug a SATA data and power cable assembly into the mating connectors on the back of the DVD-R/W drive . Ensure the
connector is fully seated .
SATA data and
power cable
7 .
Position the DVD-R/W drive in the optical drive bay as shown below . Secure the drive to the chassis with four screws through
the mounting brackets, two on each side . Use black pan-head course-thread screws provided . Tighten the screws until snug .
DVD-R/W drive in optical drive bay
Screws
Screws
8 .
Plug the SATA data cable (blue cable) into the
SATA1
connector on the PC board, then plug the SATA power cable into one of
the SATA power connectors on the PC board .