17
960H H.264 DVR User Manual
SECTION 2: HARDWARE OVERVIEW AND SETUP
3 .
Position the HDD in the optical bay as shown below, and attach it to the chassis using 4 screws, 2 on each side .
SATA1 connector
SATA0 connector
Primary HDD
Secondary HDD
PC board
4 .
Connect the HDD SATA data cable (blue) to the SATA1 connector on the PC board .
5 .
Connect the HDD SATA power cable to one of the mating connectors on the PC board .
NOTE
In a DVR with 2 HDDs, the primary HDD is connected to the SATA0 connector and the secondary HDD is connected to the SATA1
connector.