6
Camera Diagrams
9. HDMI Port (HDMI 1.4)
10. CVBS Video Output
11. 3G-SDI Video Output
12. IR Remote Controller Sensors
These are sensors to receive commands from infrared
remote controller.
13. Lens
This is a 30X magnification optical zoom lens
14. Power LED Indicator
Turns green when the camera is connected to power
outlet. When the power is turned on, it takes about 15
to 30 seconds to display the image after LED turns on.
15. Fix Mounting Holes
For original wall/ceiling mount bracket
16. Tripod mounting holes
17. Bottom DIP Switch
1. 12V DC Power Port
Connect the supplied DC power adaptor and cord.
2. USB 2.0 Port
For firmware upgrade only
3. RS232 Control Port (RJ45)
RJ45 to RS232 convertor cable is provided.
4. Video Format Selector
For video format selection
5. RS-422 Control Port (RJ45)
RJ45 to RS422 convertor cable is provided.
6. IR Remote ID Selector
Camera ID for IR remote controller
7. IP Network RJ45 Port
For VISCA over IP control and IP video streaming, with
POE+(IEEE802.3at).
8. Audio Output/Input
IR Select
USB
Video Format
DC 12V
RS232
RS422
Audio OUT
CVBS
Audio IN
HDMI
3G-SDI
PoE
