21
Storing the Camera Settings in
Memory — the Presetting Feature
Memory (Preset)
Using the preset function, 6 sets of camera shooting condi-
tions can be stored and recalled. 6 sets of camera shooting
conditions can be stored and recalled by using remote con-
troller. Up to 128 presets via protocol programming.
This function allows you to achieve the desired status instant-
ly, even without adjusting the following items each time.
•
Pan/Tilt Position
•
Zoom Position
•
Focus Auto/Manual
•
Focus Position
•
AE Mode
•
Shutter control parameters
•
Bright Control
•
Iris control parameters
•
Gain control parameters
•
Exposure Compensation On/Off
•
Exposure Level
•
Backlight Compensation On/Off
•
White Balance Mode
•
R/B Gain
•
Aperture Control
•
WD Parameter
The settings stored using this function are recalled when the
power is turned on.
1. Press the PAN-TILT RESET button to reset the pan/ tilt
position.
2. Adjust the position, zooming, focusing and backlighting
of the camera.
While holding down the PRESET button, press any of the
POSITION buttons, 1 to 6, in which you want to store the
settings.
Recalling the stored settings:
Press any of the POSITION
buttons, 1] to [6], in which you have stored the settings.
CAMERA SELECT
STD
PRESET
RESET
REV
Press a POSITION button
While holding down PRESET Button
Cancelling the preset memory:
While holding down the RE-
SET button, press the POSITION button from which you want
to cancel the settings.
CAMERA SELECT
STD
PRESET
RESET
REV
Press a POSITION button
While holding down RESET Button
Notes:
• When the power is turned on, the camera starts with
the settings stored in POSITION 1.
• If you want to retain the previous pan and tilt posi-
tions, etc. before the power is turned off and turned
on again, store those positions in POSITION 1.
• When you are storing or cancelling the settings in one
POSITION, you cannot call up, store or cancel the set-
tings in another POSITION.
• When the menu is displayed on the screen, you cannot
perform the operation for storing, recalling, or cancel-
ling the setting. Be sure to return to the normal display
before starting these operations.
Changing Resolutions
•
Press the Video Format Switching button
to populate a menu where you can switch
resolutions
•
Use the arrow keys to navigate
•
Press Home to select
•
Screen will show ‘CHANGING…”
•
Press Menu to exit
