birddog EYES P200, User Manual

Page: 15 / 24

15
Adjusting and Setting with Menus
About On-Screen Menus
You can change various settings, such as shooting conditions
and system setup of the camera, while observing menus dis-
played on a connected computer screen.
This section explains how to read the on-screen menus be-
fore starting menu operations.
The menu parameters may vary according to the different
product model numbers.
For a complete configurations menu, see “Menu Configura-
tion” (page 25).
NOTE: You cannot perform pan/tilt operations while the
menu is displayed.
Main Menu
To display the main menu, press the DATA SCREEN button on
the supplied infrared remote controller.
1. Selected Items
Selects a setting menu.
The selected item is shown by the cursor. The cursor
moves up or down by pressing the “ ↑ , ↓ ” button on the
infrared remote controller.
2. Menu Items
To display a setting menu, select one using the “ ↑ , ↓ ”
button on the infrared remote controller and press the
HOME button on the infrared remote controller.
Setting Menus
The setting menu selected on the main menu is displayed.
1. Setting Menu
The name of the setting menu currently selected is dis-
played here.
2. Selected Item
Selects a setting item.
The selected item is shown by the cursor.
Move the cursor up or down by pressing the “ ↑ , ↓ ” button
on the infrared remote controller.
3. Setting Items
The setting items for this setting menu are displayed.
Select the setting item using the “ ↑ , ↓ ” button on the
infrared remote controller.
4. Set Value
The currently set values are displayed.
To change a set value, use the “ ← , → ” button on the infra-
red remote controller.
NOTE: In some product models, only use “ ← ” button on the
infrared remote controller to change the value. To confirm
the value, you can use either “ → ” button or HOME button.
Control Button
You can select the item by pressing “ ↑ , ↓ , ← , → ” and HOME
button.
1. You can select a menu item by “ ↑ , ↓ ” button on the infra-
red remote controller. The selected item is shown by the
cursor (Color change). You can change the value of the
item by pressing “ ← , → ” button.
2. You can move to the next layer by pressing the HOME
button.
3. You can return to the normal display by pressing the
DATA SCREEN button.
NOTE: When you are operating the menu using the infra-
red remote controller, you cannot set IR- RECEIVE in the
SYSTEM menu to OFF. To set IR- RECEIVE to OFF, use the
appropriate VISCA command.
EXPOSURE Menu
The EXPOSURE menu is used to set the items related to ex-
posure.
MODE (Exposure Mode)
FULL AUTO: The exposure is adjusted automatically using
the values set for SLOW SHUTTER, S. SHUTTER LIMIT, AE
RESPONSE, GAIN LIMIT, and EX-COMP.
MANUAL: Adjust the GAIN, GAIN LIMIT, electronic shutter
speed (SPEED), iris (IRIS), and HIGH SENSITIVITY manually.
IRIS PRI: Iris Priority mode. The exposure is adjusted auto-
matically using the values manually set for iris (IRIS), GAIN
LIMIT, and EX-COMP.
OSD
EXPOSURE
WHITE BALANCE
PICTURE 1
PICTURE 2
PAN TILT ZOOM
SYSTEM
EXPOSURE MENU: FULL AUTO
MODE
SLOW SHUTTER
S. SHUTTER LIMIT
AE RESPONSE
GAIN LIMIT
EX COMP FULL AUTO
OFF
1/4
01
21.4dB
OFF
OSD
EXPOSURE
WHITE BALANCE
PICTURE 1
PICTURE 2
PAN TILT ZOOM
SYSTEM
EXPOSURE MENU: MANUAL
MODE
GAIN
GAIN LIMIT
SPEED
IRIS
HIGH SENSITIVITY MANUAL
12dB
21.4dB
1/60
F1.6
OFF