background image

3

Operating Instructions

Thank you for purchasing our product. If there are any questions, please contact your authorized dealer.

Before operating the unit, please read this manual thoroughly and retain it for future reference.

Copyright

Copyright 2019 BirdDog Australia all rights reserved. No part of this manual may be copied, reproduced, translated, or distrib-

uted in any form or by any means without prior consent in writing from our company.

Trademark Acknowledgement

 and other BirdDog’s trademarks and logos are the property of BirdDog Australia. Other trademarks, company 

names and product names contained in this manual are the property of their respective owners. 

•  Trademarks and Registered Trademark Acknowledgement

• 

Microsoft, Windows, ActiveX, and Internet Explorer are registered trademarks of Microsoft Corporation in the U.S. and/or 

other countries.

• 

HDMI, the HDMI logo and High-Definition Multimedia Interface are the trademarks or registered trademarks of HDMI Li-

censing, LLC in the United States and other countries.

• 

Other trademarks, company names and product names contained in this manual are the property of their respective owners.

Summary of Contents for EYES P200

























Reviews: