Digital Power Meter Display, 5000-NG
17
4. Select the measurement to graph from the drop-down menu.
5. Tap OK.
6. The new graph will be displayed in the Display Controls Menu below
Reading Table.
7. Tap the graph's name in the menu to display the graph.
Note:
Graphs are saved for the current mode only. If mode is changed
the saved graph will not be available until the mode associated with the
saved graph is selected. Graphs can be saved by saving a Default Preset.
Note:
Only the settings are saved, not the data. To save data see
How to delete saved graphs
1. Tap the Display Controls Menu
to display the graph options.
2. Press the name of the graph in the list until the highlighted color changes,
then tap the trash can symbol in the top right corner of the screen.
Bar Graph Controls
Note:
Graph controls are located in the Sensor Operation Menu .
Pause/Resume
When pause is tapped, graph data collection is stopped and the bar is paused.
When resume is tapped, data collection begins and bar begins moving.
Graph Readings
The bar graph initially opens with only one measurement displayed, additional
measurements may be displayed using this menu.
1. Tap the Sensor Operation Menu .
2. Tap Graph Readings to display the dialog.
3. Select as many of the listed measurements as desired.
4. Click OK after a check mark is displayed for all measurements you wish to
display together on the graph.
Graph Unit
The graph unit of measure may be changed manually by selecting a unit from
the menu.
Note:
Changing the graph unit will automatically change the scale
value.
1. Tap the Sensor Operation Menu .
