Digital Power Meter Display, 5000-NG
9
Automatic WiFi Network Connection
Note:
The Bird RF Power Meter Software is capable of connecting to
Bird Ethernet enabled devices when those devices are connected to a
WiFi enabled network.
Instructions for enabling WiFi can be found in
.
1. Enable WiFi on the 5000-NG and connect to the network supporting the
Bird Ethernet enabled device (s).
2. Tap the menu icon on the RF Meter device selection screen to display the
Preferences menu.
3. Tap Network Scan option.
4. Any Bird devices connected to the selected network should be displayed on
the device selection screen as Found Devices.
Note:
Device will be displayed by device name, followed by the IP
Address.
5. Tap the device to connect.
6. Disconnect from the WiFi device when measurements are complete. See
"WiFi Device Disconnect" on page 10
.
Note:
Consult device manual for additional operating instructions.
Manual WiFi Network Connection
Instructions for enabling WiFi can be found in
.
1. Enable WiFi on the Android device and connect to the network supporting
the Bird Ethernet enabled device (s).
2. Tap the menu icon on the RF Meter device selection screen to display the
Preferences menu.
3. Tap Add Connection.
4. Tap on the type: BPME or CPM.
5. Enter the IP address of the device as the Hostname.
6. For CPM, enter a Name if desired.
7. Tap OK.
Note:
Consult device manual for additional operating instructions.
8. Disconnect from the WiFi device when measurements are complete. See
"WiFi Device Disconnect" on page 10
.
