Digital Power Meter Display, 5000-NG
29
2. Setup the User Interface to your preferred setup. The following are
examples of custom setup items:
a. Save configurations for Graphs.
b. Organize the readings menu.
c. Configure the sensor.
d. Setup logging criteria.
3. Tap the menu overflow icon.
4. Tap Session List.
5. Press the session file for the device setup up above until the save menu is
displayed.
6. Tap Save As.
7. Select Default Preset then tap OK.
Note:
You must delete any previous session files so your Default Preset
will be used as the default Session File. This allows the same custom
setup to be viewed every time you connect to the same type of Bird
Power Sensor.
Edit Session File
Once a session file has been created, you can easily edit the session file even
when not connected to the sensor.
1. Tap the menu overflow icon.
2. Tap Session List.
3. Press the session file until the menu is displayed.
4. Tap Edit Session.
5. Edit any settings just as if the sensor was connected, any changes will be
automatically saved in the selected session file.
Export Session File
When you connect to a Bird Power Sensor with the Bird RF Power Meter
Software a Serial Number Specific Session File is created. You can also save your
settings as the default settings for your power sensor type in a Default Preset or
Preset. All of these file types can be exported from the Bird RF Power Meter
Software for use on other devices.
1. Tap the menu overflow icon.
2. Tap Session List.
3. Press the session file for the device setup up above until the save menu is
displayed.
4. Tap Export.
5. Rename the file if desired then click OK.
