Bionet BM1, User Manual

Page: 127 / 141

Rev. 2.2
127
14. Technical Specification
Technical Specification Overview
The monitor is not user installable. It must be installed by qualified service personnel.
The monitor is intended to be used for monitoring, recording, and alarming of multiple physiological
parameters of adults, pediatrics, and neonates in health care facilities. The device is to be used by
trained health care professionals.
The monitor is intended for use in health care facilities; the BM1 Monitor is additionally intended
for use in transport situations within the hospital setting.
EMC Compatibility (EMC)
Much of the information below has been borrowed from the requirements set forth in the
Electromagnetic Compatibility Standard IEC 60601-1-2 for medical electrical equipment issued by
the International Electro technical Commission and is available from a variety of sources. Although
primarily aimed at equipment manufacturers, most of the information contained here is useful for
users interested in medical equipment.
The information contained in this section (such as separation distance) is generally information
about the Bionet Patient Monitor detailed above. The numbers provided here are not guaranteed,
but are provided with reasonable assurance of error-free operation. This information may not apply
to other medical and electrical systems, and older equipment may be particularly susceptible to
interference.
NOTE

Medical electrical equipment requires special precautions for electromagnetic
compatibility and must be installed and serviced in accordance with the EMC
information in this section and in the operating instructions supplied with the