Bionet BM1 User Manual Download Page 34

Page: 34 / 141

Rev. 2.2

Alarm Status Window

The message appears at the top of the screen except for technical alarms.

EWS Window

EWS is provided in Triage mode.

It can help you to quickly determine the degree of illness of a patient.

Parameter Box Displays (Waveform & Numeric Window)

The parameter box displays values, alarm limits and icons for the selected parameter. You can set
the parameters and their associated waveforms so that they are easy to distinguish.

The character color according to the measurement time of TEMP or NIBP.

The measured value is displayed in the set color.

Function Key

On the right side of the monitor's front panel, the touch screen icon allows you to perform
frequently-used functions.

Button

Description

This is an alarm mode key, so it enables the current alarm mode one of Normal /
Audio Paused/ Alarm Paused modes.

Displays the setup menu.

Displays trend menu.

Displays the alarm setting menu.

Summary of Contents for BM1














































































































































Search results

Summary of Contents for BM1

Reviews:

Related manuals for BM1

Brands by name

Popular brands

Bionet BM1, User Manual

Search results

Summary of Contents for BM1

Reviews:

Related manuals for BM1

Brands by name

Popular brands