Veterinary monitor user’s manual
Chapter 5-21
5.5.4 Setup of NIBP Parameters
Auto Time
Configure the cycle intervals of BP measurement and options are
1min,
2min, 3min, 4min, 5min, 10min, 15min, 30min, 60min, 90min, 2Hour, 4Hour
and
8Hour
. During measurements, It cannot be altered.
Mode
Configure the measurement mode of NIBP and options are
Manual, Auto
and
STAT
.
If STAT mode is configured, after measurement, the system will be automatically
configured as the previous measurement mode. If STAT is selected, the rapid measurement
will be initiated once it is confirmed.
Object
Objects of measurements shall be configured, and options are
horse
,
dog
and
cat
. When monitoring a cat or small animal, set the object to
cat
, when monitoring dogs or
medium-size animals, set to
dog
, when monitoring horses or large animals, set to
horse
.
The selection of objects of measurements during the measuring process will terminate the
ongoing measurement.
Init_Inflate
Select the inflation pressure. You can change the cuff inflation pressure
before any measurement. If you change the pressure, the monitor will use the new value
for the next NIBP measurement.
Unit
Select the unit for the NIBP measurement, and options are
kPa
and
mmHg
.
Leakage
Air Leakage test
NIBPAlarm
Click and open the dialog of alarm configuration of NIBP.