Veterinary monitor user’s manual
Chapter 5-13
Beep Volume
Select the BEEP volume and options are
Off, 1, 2
and
3
. Once an option
is selected, a testing beep will be produced.
HR source
Select the option of HR source, and options are
AUTO, ECG
and
PLETH
.
When selecting
AUTO
, the HR source is ECG with the priority; and if there is no current
ECG, the system automatically derives HR from SpO
2
.
Scan speed
Select the scanning speed of the ECG waveform, and options are
12.5mm/s,
25mm/s
and
50mm/s
.
Alarm Setup
Click and open the dialog of SpO
2
alarm configuration.
Adjust alarm
Select this
option
to enter the configuration of alarm limits; conduct the
configurations by turning the trim knob to select high and low limits and exit by selecting
〈
EXIT
〉
.
The upper part is the high limit and the lower one is the low limit; the range of
SpO
2
alarm high limit is
50
～
100%
continuously adjustable, no lower than the low limit,