Binder MK 115 Operating Manual Download Page 60

Page: 60 / 159

MK / MKT (E5) 03/2019

page 60/158

10.4 Program editor: program management

Path:

Main menu > Programs > Week program

“Week program” menu:
overview of the existing programs.

Select an existing program (example: pro-
gram 1).

Program view (example: program 1).

If a new program has been created, there is
just one program section.

There are the following options:



Select a program section to open the

section editor (chap. 10.5)



Press the

Edit

icon to open the program

editor

Program editor: “Edit program” menu.

Select the desired function and press the

Confirm

icon.

The program editor offers following options:

•

Change program name. This menu also offers to configure the ramp / step mode setting (chap.

10.6.1).

•

Copy program

•

Replace program: Replacing an new or an existing program with the copied program. This menu point

is visible only after a section has been copied.

•

Delete program

•

Create new section







Summary of Contents for MK 115
































































































































































Search results

Summary of Contents for MK 115

Reviews:

Related manuals for MK 115

Brands by name

Popular brands

Binder MK 115, Operating Manual

Search results

Summary of Contents for MK 115

Reviews:

Related manuals for MK 115

Brands by name

Popular brands