Binder MK 115 Operating Manual Download Page 61

Page: 61 / 159

MK / MKT (E5) 03/2019

page 61/158

To add a new section, select “Create new
section” and press the

Confirm

icon.

The program view opens.

Program view.

With a new section no weekday is specified. There-
fore the section is first marked in red and cannot be
saved.

A new section is always added at the very bottom
(example: section 3). When the section start is spec-
ified the sections are automatically arranged in the
correct chronological order.

10.4.1 Deleting a week program

Path:

Main menu > Programs > Week program

In the “Week program” menu select the program to be deleted. The program view opens.

In the

program

view

press the

Edit

icon to open the program editor

In the

program

editor

select “Delete program” and press the

Confirm

icon.

The program is deleted. The controller returns to the program view.

Summary of Contents for MK 115
































































































































































Search results

Summary of Contents for MK 115

Reviews:

Related manuals for MK 115

Brands by name

Popular brands

Binder MK 115, Operating Manual

Search results

Summary of Contents for MK 115

Reviews:

Related manuals for MK 115

Brands by name

Popular brands