Binder MK 115, Operating Manual

Page: 64 / 159

MK / MKT (E5) 03/2019 page 64/158
Section editor: “Edit section” menu
Select “Replace section” to replace the selected sec-
tion with the copied section
or
Select “Insert section” to additionally add the copied
section.
Press the Confirm icon.
If you selected “Insert section” the sections are auto-
matically arranged in the correct chronological order.
10.5.3 Deleting a program section
In the program view select the program section to be deleted. The section view opens.
In the section view press the Edit icon to open the section editor
In the section editor select “Delete section” and press the Confirm icon.
The section is deleted. The controller returns to the section view.
10.6 Value entry for a program section
Path: Main menu > Programs > Week program
Select the desired program and section.
The setting and control ranges for the individual parameters are the same as for “Fixed value” operating
mode (chap. 7).
10.6.1 Set-point ramp and set-point step modes
The explanation of the settings “Ramp” or “Step” is given in chap. 9.7.2.
You can define the type of temperature transitions for the entire week program.
Select the desired program and press the Edit icon to open the program editor. In the program editor se-
lect the “Change program name” function and press the Confirm icon.