WR3000N
300M Wireless N Router
- 59 -
¾
ALG -
It is recommended to enable Application Layer Gateway (ALG) because ALG allows
customized Network Address Translation (NAT) traversal filters to be plugged into the
gateway to support address and port translation for certain application layer "control/data"
protocols such as FTP, TFTP, H323 etc.
z
FTP ALG -
To allow FTP clients and servers to transfer data across NAT, keep the
default
Enable
.
z
TFTP ALG -
To allow TFTP clients and servers to transfer data across NAT, keep the
default
Enable
.
z
H323 ALG -
To allow Microsoft NetMeeting clients to communicate across NAT, keep
the default
Enable
.
Click the
Save
button to save your settings.
4.9.2 Advanced Security
Choose menu “
Security
→
Advanced Security
”, you can protect the Router from being
attacked by TCP-SYN Flood, UDP Flood and ICMP-Flood in the screen as shown in Figure 4-39.
Figure 4-39 Advanced Security
¾
Packets Statistics Interval (5~60) -
The default value is 10. Select a value between 5 and
60 seconds from the drop-down list. The Packets Statistics Interval value indicates the time
Summary of Contents for WR3000N
Page 1: ...User Guide WR3000N 300M Wireless N Router 1910020440 Rev 1 0 0...
Page 21: ...WR3000N 300M Wireless N Router 15 Figure 3 11 Quick Setup Finish...
Page 23: ...WR3000N 300M Wireless N Router 17 Figure 4 1 Router Status...
Page 109: ...WR3000N 300M Wireless N Router 103 Now click OK to keep your settings...
