WR3000N
300M Wireless N Router
- 13 -
¾
Default Gateway -
Enter the gateway IP address into the box if required.
¾
Primary
DNS -
Enter the DNS Server IP address into the box if required.
¾
Secondary DNS -
If your ISP provides another DNS server, enter it into this field.
5. Click
Next
to continue, the Wireless settings page will appear as shown in Figure 3-9.
Figure 3-9 Quick Setup – Wireless
¾
Wireless Radio -
Enable or disable the wireless radio choosing from the drop-down list.
¾
Wireless Network Name -
Enter a value of up to 32 characters. The same name of
wireless network must be assigned to all wireless devices in your network. Considering
your wireless network security, the default Wireless Network Name is set to be
Binatone_XXXXXX (XXXXXX indicates the last unique six numbers of each Router’s
MAC address). This value is case-sensitive. For example,
TEST
is NOT the same as
test
.
¾
Region
-
Select your region from the drop-down list. This field specifies the region
where the wireless function of the Router can be used. It may be illegal to use the
wireless function of the Router in a region other than one of those specified in this field.
If your country or region is not listed, please contact your local government agency for
assistance.
)
Note:
Limited by local law regulations, version for North America does not have region
selection option.
Summary of Contents for WR3000N
Page 1: ...User Guide WR3000N 300M Wireless N Router 1910020440 Rev 1 0 0...
Page 21: ...WR3000N 300M Wireless N Router 15 Figure 3 11 Quick Setup Finish...
Page 23: ...WR3000N 300M Wireless N Router 17 Figure 4 1 Router Status...
Page 109: ...WR3000N 300M Wireless N Router 103 Now click OK to keep your settings...
