Binatone WR3000N, User Manual

Page: 48 / 112

WR3000N 300M Wireless N Router
- 42 -
Figure 4-18
•
Type - you can choose the type for the WEP security on the drop-down list. The default
setting is Automatic , which can select Shared Key or Open System authentication type
automatically based on the wireless station's capability and request.
•
WEP Key Format - Hexadecimal and ASCII formats are provided here
.
Hexadecimal
format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified
length. ASCII format stands for any combination of keyboard characters in the specified
length.
•
WEP Key - Select which of the four keys will be used and enter the matching WEP key that
you create. Make sure these values are identical on all wireless stations in your network.
• Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for
encryption. "Disabled" means this WEP key entry is invalid.
64-bit - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 5 ASCII characters.
128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 13 ASCII characters.
152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 16 ASCII characters.
)
Note:
If you do not set the key, the wireless security function is still disabled even if you have
selected Shared Key as Authentication Type.
¾ WPA/WPA2 - Enterprise- It’s based on Radius Server.
•
Version - you can choose the version of the WPA security on the drop-down list. The
default setting is Automatic , which can select WPA ( Wi-Fi Protected Access) or WPA2
( WPA version 2) automatically based on the wireless station's capability and request.
•
Encryption - You can select either Automatic , or TKIP or AES.
)
Note:
If you check the WPA/WPA2-Enterprise radio button and choose TKIP encryption, you will
find a notice in red as shown in Figure 4-19