WR3000N
300M Wireless N Router
- 36 -
Figure 4-12 LAN
¾
MAC Address
-
The physical address of the Router, as seen from the LAN. The value can't
be changed.
¾
IP Address -
Enter the IP address of your Router or reset it in dotted-decimal notation
(factory default: 192.168.0.1).
¾
Subnet Mask -
An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
)
Note:
1) If you change the IP Address of LAN, you must use the new IP Address to log in the Router.
2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP
server will change accordingly at the same time
，
while the Virtual Server and DMZ Host will
not take effect until they are re-configured.
4.5.3 MAC Clone
Choose menu “
Network
→
MAC Clone
”, you can configure the MAC address of the WAN on
the screen below, Figure 4-13:
Figure 4-13 MAC Address Clone
Summary of Contents for WR3000N
Page 1: ...User Guide WR3000N 300M Wireless N Router 1910020440 Rev 1 0 0...
Page 21: ...WR3000N 300M Wireless N Router 15 Figure 3 11 Quick Setup Finish...
Page 23: ...WR3000N 300M Wireless N Router 17 Figure 4 1 Router Status...
Page 109: ...WR3000N 300M Wireless N Router 103 Now click OK to keep your settings...
