WR3000N
300M Wireless N Router
- 50 -
)
Note:
To use the DHCP server function of the Router, you must configure all computers on the LAN as
"Obtain an IP Address automatically".
4.7.2 DHCP Clients List
Choose menu “
DHCP
→
DHCP Clients List
”, you can view the information about the clients
attached to the Router in the screen as shown in Figure 4-27.
Figure 4-27 DHCP Clients List
¾
Client Name
-
The name of the DHCP client
¾
MAC Address
-
The MAC address of the DHCP client
¾
Assigned IP
-
The IP address that the Router has allocated to the DHCP client
¾
Lease Time
-
The time of the DHCP client leased. After the dynamic IP address has expired,
a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click the
Refresh
button.
4.7.3 Address Reservation
Choose menu “
DHCP
→
Address Reservation
”, you can view and add a reserved address for
clients via the next screen (shown in Figure 4-28).When you specify a reserved IP address for a
PC on the LAN, that PC will always receive the same IP address each time when it accesses the
DHCP server. Reserved IP addresses should be assigned to the servers that require permanent
IP settings.
Summary of Contents for WR3000N
Page 1: ...User Guide WR3000N 300M Wireless N Router 1910020440 Rev 1 0 0...
Page 21: ...WR3000N 300M Wireless N Router 15 Figure 3 11 Quick Setup Finish...
Page 23: ...WR3000N 300M Wireless N Router 17 Figure 4 1 Router Status...
Page 109: ...WR3000N 300M Wireless N Router 103 Now click OK to keep your settings...
