Bilanciai DD1050 Operation, Maintenance And Installation Manual Download Page 94

Page: 94 / 112

DD1050

field:

Alias scale (param_ScaleAlias).

> Mnemonic name to assign to the scale, e.g. Scale A or B, etc.
Default Value: []; Type: String, Length MAX: 20

9.30 CbMainWeight.ConfigOutputSlow.ConfigSchema.xml

Plugin: PluginCbMainWeight

Schema: ConfigSchema

Component Name:

Slow - (CbMainWeight.ConfigOutputSlow)

Category:

- (UseMode)

SubPath:

I/O Board::Outputs - (RESOURCE::CbMainWeight.param_SchedaIO_Output)

field:

Output Node (param_OutputNode).

> Indicates the network node. The terminal used is indicated with localhost. Select node from

pop-up list.

Default Value: []; Type: String, Length MAX: 20

field:

Output Number (param_OutputNumber).

> Number/name to assign to the output. The terminal cannot contain outputs with the same

number/name.

Default Value: []; Type: String, Length MAX: 20

9.31 CbMainWeight.ConfigOutputTrafficLight.ConfigSchema.xml

Plugin: PluginCbMainWeight

Schema: ConfigSchema

Component Name:

Traffic Light - (CbMainWeight.ConfigOutputTrafficLight)

Category:

- (UseMode)

SubPath:

I/O Board::Outputs - (RESOURCE::CbMainWeight.param_SchedaIO_Output)

field:

Output Node green traffic light (param_OutputNodeGreen).

> Indicates the node in the network where the green traffic light activates. The terminal used

is indicated with localhost. Select node from pop-up list.

Default Value: []; Type: String, Length MAX: 20

field:

Output Number green traffic light (param_OutputNumberGreen).

> Number/name to assign to the green traffic light. The terminal cannot contain outputs with

the same number/name.

Default Value: []; Type: String, Length MAX: 20

field:

Output Node red traffic light (param_OutputNodeRed).

> Indicates the node in the network where the red traffic light activates. The terminal used is

indicated with localhost. Select node from pop-up list.

Default Value: []; Type: String, Length MAX: 20

field:

Output Number red traffic light (param_OutputNumberRed).

> Number/name to assign to the red traffic light. The terminal cannot contain outputs with the

same number/name.

Default Value: []; Type: String, Length MAX: 20

Summary of Contents for DD1050

















































































































Search results

Summary of Contents for DD1050

Reviews:

Related manuals for DD1050

Brands by name

Popular brands

Bilanciai DD1050, Operation, Maintenance And Installation Manual

Search results

Summary of Contents for DD1050

Reviews:

Related manuals for DD1050

Brands by name

Popular brands